iFlight Nazgul Evoque F5D V2 HD FPV Drone (6S / DJI O3 / ELRS)
iFlight Nazgul Evoque F5D V2 HD FPV Drone (6S / DJI O3 / ELRS) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
iFlight Nazgul Evoque F5D V2 HD FPV Drone (6S / DJI O3 / ELRS)
Introducing the Nazgul Evoque F5D now with ELRS! Another breakthrough in FPV visuals from DJI with our upgraded frame and electronics. A new standard of Bind-And-Fly drones that are simple to get started with but the durability and performance for enthusiasts. Welcome to the iFlight experience!
FEATURES:
- Smooth and Powerful XING2 Motors
- Latest Nazgul Frame for Maximum Protection
- DJI O3 HD Air Unit Low-Latency digital transmission
- 4K Stabilized Video with 155° Ultra-Wide Angle
- Secured Battery Plug with Anti-Spark Filter
- Specially Designed Heatsink for DJI O3 HD Air Unit
REQUIRED:
(1) Radio Controller w/ Correct Protocol
(1) DJI FPV Goggles
(1) 4-6S Li-Po Battery w/ XT60 Connector
(1) LiPo Charger
SPECIFICATIONS:
Drone:
-
FC: BLITZ Mini F722 Flight Controller
- ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC
- Video Transmission: DJI O3 Air Unit
- Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat)
- Motor: XING2 2207 motors
- Prop: Nazgul 5 inch propellers
- Weight: 433g/436g
- Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery)
- Dimensions (L×W×H): 190×136×36 mm
- Diagonal Distance: 225 mm
- Max Speed: 190 Km/h (Manual Mode)
- Maximum Takeoff Altitude: 5000 m
- Max Hover Time: Approx. 8 mins
- Max Flight Distance: 5 km
- Max Wind Speed Resistance: Level 7
- Operating Temperature Range: -10° to 40° C (14° to 104° F)
- Antennas: Dual Antennas
- Recommended Battery: 6S LiPo 1000mAh-1500mAh (Not Included)
- Connector: XT60
VTX:
- Type: DJI O3 Air Unit
- Weight: Approx. 36.4g (headband included）
- Communication Bandwidth: Max 40 MHz
- FOV (single screen): 155°
- Communication Frequency (RX Only): 2.400-2.4835GHz
- Communication Frequency (RX and TX): 5.725-5.850GHz
- With DJI FPV Goggles V2:
- 810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
- 810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
- With DJI Goggles 2:
- 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
- 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
- Max Video Transmission Bitrate: 50 Mbps
- Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
- Operating Temperature Range: -10º to 40º C (14° to 104° F)
- Power Input: 7.4-26.4V
INCLUDES:
(1) iFlight Nazgul Evoque F5D V2 HD FPV Drone (ELRS / DJI O3 / 6S)
(2) 5.8GHz FPV Antennas
(2) Battery pads
(2) Nazgul 5" Prop Sets
(3) Battery straps
(1) DJI O3 Air Unit Bottom Cover
(4) Locknuts (Black)
(1) Screw Set
MORE INFO:
Smooth and Powerful XING2 Motors. The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash-resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection.
Latest Nazgul Frame for Maximum Protection. The old days are over, getting your electronics full of dirt and wet grass every time you crash. Their latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.
DJI O3 HD Air Unit Low-Latency digital transmission. Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI)
4K Stabilized Video with 155° Ultra-Wide Angle. Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI)
Secured Battery Plug with Anti-Spark Filter. Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.
Specially Designed Heatsink for DJI O3 HD Air Unit. Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.
Quick FAQs
Is the product I want in stock?
Is the product I want in stock?
Unless a product shows a status of "Out of Stock", it is in-stock and ready to be shipped or ordered for pick-up.
All items shown on our website are shipped out by our brick-and-mortar store in Jacksonville, Florida.
Where do you ship?
Where do you ship?
We currently ship to the United States and all US Territories, including Puerto Rico. To inquire about shipping to a different destination, please contact us.
When will I receive my order?
When will I receive my order?
Economy Shipping normally takes 5-8 days while Standard Shipping usually arrives in 3-5 days.
Please see our Shipping Policy for additional info including processing times.
Can I pick up my order?
Can I pick up my order?
Yes, we offer Free Pickup, during regular business hours, in addition to our standard shipping options at checkout.
How do I return a product?
How do I return a product?
Items can be returned In-Store during regular business hours.
For online purchases, please e-mail us at sales@rc-n-go.com for a Return Authorization.
Please see our Return Policy for more details.
