GEPRC Mark5 HD 5" FPV Drone (6S / Walksnail Avatar / PNP)

Introducing the Mark5 from GEPRC a drone that is designed specifically for freestyle flying with its squashed X arm design. It also features a unique shock-absorbing structure, with fewer vibrations, and resonance that provides a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning but reduce weight and add more endurance. Mark5 is equipped with GEPRC’s latest SPAN F722-BT-HD V2 FC with high performance and lots of ports, supporting Bluetooth wireless connection for easy field tuning.

Freshly upgraded BLHeli_32 4IN1 50A ESC with GEPRC’s latest 2107.5 motors, has great explosive power and very fast response speed. The HQ Ethix S5 5×4×3 propellers provide a delicate and silky smooth flight experience. The Mark5 is shipped with two different 3D printed action cam mounts that can be fitted with GP8/9/10, Naked camera GP8, Insta 360 GO2, and Caddx Peanut cameras. After continuous testing and tuning by GEPRC R&D team, this is yet another GEPRC drone that comes perfectly tuned right out of the box. Just take it out, install a preferred radio receiver, plug the battery, and have fun!

FEATURES:

• Aluminum alloy side plates not only look stunning but reduce weight and add more endurance.
• Bluetooth compatible for easy wireless field tuning
• Developed specifically for freestyle with squashed X-arm design.
• This HD version comes with the Caddx Walksnail Avatar VTX system.
• Freshly upgraded SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC with GEPRC’s latest 2107.5 motor, has great explosive power and very fast response speed.
• Unique shock-absorbing structure design for less vibration
• The new HQ Ethix S5 5×4×3 propellers provide a delicate and silky smooth flight experience.
• Specially designed independent capacitor and buzzer compartment to reduce shaking and increase performance.
• Shipped with two different 3D printed action cam mounts that can be fitted with a GoPro camera, Naked camera GP8, Insta 360 GO2, and Caddx Peanut cameras.

REQUIRED:

(1) Radio Controller
(1) Radio Receiver
(1) Walksnail FPV Goggles
(1) 4-6S Li-Po Battery w/ XT60 Connector
(1) LiPo Charger

SPECIFICATIONS:

• Frame: GEP-MK5
• Wheelbase: 225mm
• Top plate: 2.5mm
• Bottom plate: 2.5mm
• Arm plate: 5mm
• FC system: SPAN F722-BT-HD V2
• MCU: STM32F722
• Gyro: 42688-P
• OSD: BetaFlight OSD w/AT7456E chip
• ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
• VTX: Walksnail Avatar
• Camera: Walksnail Avatar Micro
• Charge connector: XT60
• Propellers: HQ Ethix S5 5×4×3
• Antenna: Walksnail 5.8G LHCP u.FL
• Motor: SPEEDX2 2107.5-1960KV (6S Version)
• Weight: ~385g
• Receiver: PNP (None)
• Recommended Battery: 6S LiPo 6S 1050mAh-1550mAh (Not included)

INCLUDES:

(1) GEPRC Mark5 HD FPV Drone (6S / Walksnail Avatar / PNP)
(2) HQ Ethix S5 5×4×3 Propeller Sets
(1) M15x250mm Battery strap 
(2) M20x220mm Battery straps
(2) Battery Silicone Pads
(1) Camera cage carbon top plate
(1) 3D print mountings combination
(2)  Action Camera Mounts
(1)  Hardware Set
(1)  Screwdriver Set
(2)  Antenna Protection Tubes

MORE INFO: